Ratio Scaling Calculator

Scale a ratio up or down by a multiplier, or tell it the amount you need for one term and it works out the multiplier for you. Either way the proportions stay exactly the same.

Scale by
Enter > 1 to scale up, or < 1 (e.g. 0.5) to scale down.
Scaled Ratio
6 : 15
Scaled Term A6 (was 2)
Scaled Term B15 (was 5)
Step-by-Step Scaling Derivation:
  1. Original ratio: 2 : 5 with multiplier scale factor × 3.
  2. Multiply Term A: 2 × 3 = 6.
  3. Multiply Term B: 5 × 3 = 15.
  4. Verify equality: 6 / 15 = 0.4, which equals original 2 / 5 = 0.4.
  5. Scaled ratio is 6 : 15.

The Mathematical Law of Proportional Scaling

Direct Scale Multiplier

Given a ratio A : B and a scalar multiplier k:

Scaled Ratio = (k × A) : (k × B)

Because both terms are multiplied by the same non-zero scalar, the quotient (kA) / (kB) = A / B remains constant.

Finding Scale Factor From Target Amount

If you need Term A to equal a target quantity Atarget:

k = Atarget / A  →  Bnew = k × B

Example: If 2 cups flour makes 12 cookies, scaling to 5 cups flour gives k = 5/2 = 2.5 multiplier.

Try it above: choose A target amount, enter 2 and 12, set Term A to 5, and the result is 5 : 30 cookies.

Practical Real-World Scaling Scenarios

Culinary

Bakery Batch Scaling

Scaling a dough recipe for 4 loaves up to 14 loaves.

Scale factor k = 14 / 4 = 3.5
Flour (500g): 500 × 3.5 = 1750g
Water (350g): 350 × 3.5 = 1225g
Architecture

Scale Model Conversion

Converting real building dimensions to 1:50 scale.

Scale factor k = 1 / 50 = 0.02
Length (15m = 1500cm): 30 cm
Height (6m = 600cm): 12 cm
Engineering

Epoxy Resin Mix

100:45 resin to hardener by weight for a 500g resin project.

Scale factor k = 500 / 100 = 5.0
Resin: 100 × 5 = 500g
Hardener: 45 × 5 = 225g

How to Use the Ratio Scaling Calculator

  1. Enter the original ratio in Original Term A and Original Term B, for example 300 and 450.
  2. Choose A multiplier to multiply both terms by a factor you pick: 2 doubles, 0.5 halves and 1.5 adds half as much again.
  3. Or choose A target amount when you know what one term has to become. Pick the term to match, type the target, and the calculator works out the multiplier for you.
  4. Press Scale Ratio. Scaled terms are rounded to 4 decimal places, and the last step checks that A ÷ B is unchanged.

Ratio Scaling Examples

Recipe From 4 to 6 Servings

A recipe for 4 uses 300 g of rice to 450 ml of water. For 6 servings the factor is 6 ÷ 4 = 1.5, so use 450 g of rice and 675 ml of water.

Scaling Down to What You Have

You only have 225 g of rice. In target mode, set Term A to 225. The factor is 225 ÷ 300 = 0.75, so the water becomes 450 × 0.75 = 337.5 ml.

Awkward Factors

To turn 9 : 12 into a ratio that starts with 6, the factor is 6 ÷ 9 = 2/3, or 0.6666…. Typing 0.67 as a multiplier gives 6.03 : 8.04. Target mode uses the exact factor and gives 6 : 8.

Three or More Terms

The calculator scales two terms, but the rule is the same for any number: multiply every term by the same factor. 1 : 2 : 3 scaled by 4 is 4 : 8 : 12.

Scaling vs. Adding: Common Mistakes

  • Adding instead of multiplying. Adding 2 to each term of 3 : 4 gives 5 : 6, which is a different ratio (0.75 versus about 0.83). Only multiplying or dividing every term by the same number keeps the proportions.
  • Scaling only one term. Doubling the flour without doubling the water changes the mix. Every term has to change by the same factor.
  • Not checking the result. A scaled ratio always simplifies back to the original. 2 : 5 scaled by 3 is 6 : 15, which simplifies to 2 : 5 again; the Ratio Simplifier is a quick way to check.
  • Assuming everything scales in a straight line. Ingredient ratios scale, but cooking times, pan sizes and seasoning often do not. Lengths in a model scale by the factor, areas by the factor squared and volumes by the factor cubed, so a model twice as long has 4 times the surface area and 8 times the volume. See cooking ratio examples for more recipe problems.

Related Mathematical Utilities

Explore connected tools for proportion, simplification, and aspect scaling:

Frequently Asked Questions

How does scaling a ratio differ from simplifying a ratio?▼

Simplifying divides ratio terms by their Greatest Common Divisor to express the relationship in lowest whole numbers. Scaling multiplies (or divides) all terms by a constant scale factor k to adapt the quantities for a larger or smaller target size without changing the proportion.

What happens if I scale a ratio by a decimal factor like 1.75?▼

Each term is multiplied by 1.75. For example, scaling 4 : 5 by 1.75 yields 7 : 8.75. If whole numbers are required, you can further multiply by 4 to get 28 : 35.

How do I find the scale factor needed to reach a desired target quantity?▼

Divide the target value by the corresponding original term: Scale Factor k = Target / Original. Then multiply every other ratio term by k. The calculator's 'To a target amount' mode does this for you: choose the term, enter the amount you need, and it shows k and the scaled ratio.

How do I scale a recipe ratio for more or fewer servings?▼

Divide the number of servings you want by the number the recipe makes to get the scale factor, then multiply every ingredient by it. Going from 4 servings to 6 is a factor of 6 ÷ 4 = 1.5; going from 4 to 3 is a factor of 0.75.

Can a scale factor be less than 1?▼

Yes. Any factor between 0 and 1 makes the ratio smaller while keeping its proportions: 0.5 halves every term and 0.25 quarters it. The factor must be greater than 0.

Does scaling a ratio change its simplest form?▼

No. Multiplying every term by the same number gives an equivalent ratio, so the simplest form stays the same. 2 : 5, 6 : 15 and 20 : 50 all simplify to 2 : 5.

Found a mistake? Email contact@ratiocalculator.site